For you, we have selected some useful and simple ideas.
Does your bedroom look dull and faceless?
Add a new bright detail. To do this, you will need: a lamp with a lampshade a small segment of a cute braid wallpaper or a lace newspaper universal glue double-sided tape. Lay the lampshade sideways to the large newspaper sheet where the seam is at the lampshade. Outline the edges with a pencil on both sides, making a full circle (add a couple of centimeters per joint to the size). Cut out the outline of the newspaper. You should get an elongated rectangle. Then cut the wallpaper along the resulting contour. Glue double-sided tape to the upper and lower edge of the wallpaper and gently attach the wallpaper to the lampshade. Beautiful handmade DIY lamp is ready!
How to make a lamp if you still have old things from wool?
From an old woolen sweater with a large knit, cut a shelf or back - depending on the size of your lampshade. Pull the lampshade in its widest part - the bottom, fasten by cleaving with pins. Then move up, gently stitching the coat. Bend the upper part under the bezel of the lampshade, pulling and picking it up so that it smoothes out and fits tightly. Glue the woolen lampshade with double-sided tape or using a heat gun.
For a small night light or sconce, cropped leggings or woolen knee-high socks with a pattern are suitable. It is necessary to pull the leggings over the lampshade, trim them in height, leaving a few centimeters on the hem, and glue the edges with the glue gun. The lower part can be pulled over the thread and tied tightly.
Make a gentle lamp with your own hands from a plastic lampshade and a substitute napkin.
Watch the video do-it-yourself lamp workshop
Bright do-it-yourself lamp for a children's room or kitchen.
Pick up the multi-colored buttons that will harmoniously blend with each other, and stick them onto the fabric lampshade using the “Moment” glue. Move in random order, starting with larger buttons, and then fill in the remaining spaces with those that are smaller. Decorate the lamp foot with multi-colored floss thread. Wind the thread on the base, fix the end with glue, and then move up or down, creating rings of different width and color on the lamp leg.
Do it yourself wall lamp update!
First remove the glass pendants, leaving only the metal base. Seal the parts that are not going to be painted with masking tape. Degrease the surface by wiping it with vinegar or acetone. Then apply the first coat of acrylic paint from the spray can. Try to apply the paint evenly, keeping the spray can at a distance of 50 cm so that there are no drips left. After the paint dries, apply a second coat and, if necessary, a third. A small lampshade will add elegance to your lamp and create softer lighting in the room.
Use real tree leaves as a stencil to decorate your own lamp with a lampshade.
Lay the lampshade on its side on a piece of paper and roll it, outlining the outline on both sides. Place the fabric along the oblique and cut it out according to the pattern. Glue the fabric to the lampshade. A small oak leaf is suitable for decoration. Using it as a stencil, cut the same leaves from the fabric. Take two fabric sheets. Make a small incision at the bottom of one and at the top of the other. Insert the leaves into each other crosswise and glue on the lampshade in the previously designated places.
Decorate the lamp with your own hands using beautiful autumn leaves.
You will need:
- wine bottle crate
- electrical fittings
- acrylic paint
- dried flowers
- willow leaves after preservation with glycerin
- glue gun
- Color the wine box dark acrylic paint in several layers, let it dry.
- We drill a hole in the upper part of the box for attaching a cartridge. We insert the wire and with the help of a thermal gun we glue the base to the upper end of the box. We withdraw the wire.
- Cooking willow twigs using the glycerin preservation method. We glue them with a gun to the base of the lamp, and decorate the lampshade with dried flowers.